Direct Estimation of the Surface Location of Immobilized Functional Groups for Concerted Catalysis Using a Probe Molecule

The location of active sites during concerted catalysis by a metal complex and tertiary amine on a SiO₂ surface is discussed based on the interaction between the functionalized SiO₂ surface and a probe molecule, p‐formyl phenylboronic acid. The interactions of the probe molecule with the surface functionalities, diamine ligand, and tertiary amine, were analyzed by FT‐IR and solid‐state ¹³C and ¹¹B MAS NMR. For the catalyst exhibiting high 1,4‐addition activity, the diamine ligand and tertiary amine base exist in closer proximity than in the catalyst with low activity.     

Polymerization of lactide and synthesis of block copolymer catalyzed by copper(Ⅱ) Schiff base complex

In the present investigation, the novel copper Schiff base complex was synthesized and its catalytic activity was evaluated for the ring-opening polymerization (ROP) of lactide and block polymerization of poly(lactide) with poly(ethylene glycol)methyl ether.     

一种带疏水长链的水溶性偶氮引发剂的合成及端基疏水聚合物疏水缔合效应研究

以偶氮二异丁腈、十二胺为主要原料,通过Pinner反应制备了一种两端各带有12个碳烷基链的水溶性偶氮引发剂——2,2'-偶氮二异丁基十二脒盐酸盐AIBL.采用核磁氢谱、元素分析及液相色谱对AIBL进行了结构及纯度表征,采用TGA、DSC和紫外分光光度计研究了其热分解现象和热分解动力学,采用表面张力仪对其表面活性进行了测定.结果表明,所合成的引发剂AIBL具有预想的结构和较高的纯度,其热分解反应属于一级反应,热分解活化能为134.80 k J/mol,70℃下水中的半衰期约为4 h;AIBL在水溶液中具有表面活性,其临界胶束浓度为0.13 g/L,对应的表面张力为33.57 m N/m.以丙烯酰胺为单体、AIBL为引发剂制备了水溶性端基疏水聚合物SPAM.采用溴化法研究其转化率,应用乌氏黏度法、零切黏度法以及荧光探针对其缔合作用进行了研究.结果表明,AIBL具有良好的引发丙烯酰胺聚合的能力;相对于不带疏水长链的引发剂所合成的聚合物PAM,SPAM具有明显的疏水缔合效应,这说明AIBL成功地将疏水长链引入到聚合物的端基中,从而形成端基疏水聚合物.     

Comparison of monomethoxy‐, dimethoxy‐, and trimethoxysilane anchor groups for surface‐initiated RAFT polymerization from silica surfaces

The immobilization of reversible addition–fragmentation chain transfer (RAFT) agents on silica for surface‐initiated RAFT polymerizations (SI‐RAFT) via the Z‐group approach was studied systematically in dependence of the functionality of the RAFT‐agent anchor group. Monoalkoxy‐, dialkoxy‐, and trialkoxy silyl ether groups were incorporated into trithiocarbonate‐type RAFT agents and bound to planar silica surfaces as well as to silica nanoparticles. The immobilization efficiency and the structure of the bound RAFT‐agent film varied strongly in dependence of the used solvent (toluene vs. 1,2‐dimethoxyethane) and the anchor group functionality, as evidenced by atomic force microscopy, transmission electron microscopy, dynamic light scattering, and UV/Vis spectroscopy. Surface‐initiated RAFT polymerizations using functionalized silica nanoparticles revealed that grafted oligomers, which often occur in SI‐RAFT, are not formed within the crosslinked structures that originate from the immobilization, and that RAFT‐agent films that show less aggregation during the immobilization are more efficient during SI‐RAFT in terms of polymer grafting density. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 103–113     

XPS and resistive studies on thin films of a copper(II)‐based coordination polymer deposited on functionalized interdigital electrodes

A symmetrical 2‐thiopyrimidine based molecule with an expanded π‐electron system is synthesized and used to form a self‐assembled monolayer (SAM) on gold surfaces. Utilizing chemical vapor deposition a monolayer of (3‐mercaptopropyl)triethoxysilane is formed on silicon dioxide substrates. Both of these SAM coated substrates are characterized by X‐ray photoelectron spectroscopy and the growth of a coordination polymer built up from 5,5′‐(ethyne‐1,2‐diyl)bis(2‐hydroxyacetophenone) and copper(II) on dual SAM coated transducers is studied. After the deposition procedure on interdigital electrodes the electrical properties of the polymer are investigated performing resistive measurements. A significant change of the resistance, which depends on the surrounding atmosphere, proves the sensing behavior of the synthesized coordination polymer. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 335–344     

有机共轭高聚物的分子链间耦合局域态

有机共轭高分子中,孤子、极化子及激子都是基本的元激发,对解释有机聚合材料的导电发光特性起着主导作用.孤子、极化子以及激子等在晶格位形上都是各具特征的空间局域状态.本文将讨论在有机共轭高分子中存在着另一种局域态——链间耦合局域态,这种局域态是由于分子链间的相互作用所导致,在相互作用分子链端附近形成势阱,可有效束缚电子和空穴等带电粒子.     

Functional Zwitterionic Polymers on Surface: Structures and Applications

Zwitterionic polymers are important in a wide range of industrial, biological and medical fields. Their chemical structures include an equal amount of anion and cation groups, and such structures give rise to many unique functionalities, such as temperature response, anti‐polyelectrolyte effect, and strong hydration properties. In this review, we focus on the structures and applications of functional zwitterionic polymers on surfaces. We review three areas of applications according to the architecture of the polymeric systems: surface coating, complex solutions, and hydrogel. We review the simulation and theory work and highlight some outlooks for further development.     

Calcium-based coordination polymers from a solvothermal synthesis of HKUST-1 in 3D printed autoclaves

A mixed-metal 1D coordination polymer [CaCu(HBTC)₂(H2O)₈]_n (where H₃BTC – benzene-1,3,5-tric arboxylic acid) was obtained in a solvothermal synthesis of a well-known copper-containing metal–organic framework [Cu₃(BTC)₂(H₂O)₃]_n (HKUST-1) in autoclaves 3D-printed from commercial polypropylene. This material was a source of calcium ions, apparently, leaking from a colorant (calcium carbonate) promoted by glacial acetic acid as a modulator used to produce large single crystals of HKUST-1. This finding was confirmed by elemental analysis and a model experiment that resulted in a new calcium-based 1D coordination polymer [Ca(H₂BTC)₂(H₂O)₅]_n under the same solvothermal conditions with no copper or calcium salts put into a 3D-printed autoclave.     

Thermally driven self-healing PEDOT conductive films relying on reversible and multiple Diels–Alder interaction

Thermally healing capability of cracks and defects is important and urgent for the safe operation and life extending of electric materials and devices. Here, by the combination of thermally driven reversible Diels–Alder (DA) interaction and in-situ chemical oxidative polymerization of 3,4-ethylenedioxythiophene (EDOT), a series of intrinsically conductive poly(3,4-ethylenedioxythiophene) (PEDOT)/DA composites possess intrinsically self-healing property under low-temperature (reverse DA reaction at 100°C; DA crosslinking at 60°C) stimulus were achieved. The crosslinking DA bonding reactions are multiple from the co-existence of pre-synthesized macromolecular polyurethane attached DA units (PU-DA) and 2,4-hexadiyne-1,6-diol (DADOL) in the films. PU-DA involved in the polymerization process of EDOT to endow PEDOT with outstanding solution-processability, uniform film making, and structural self-healing capability, while DADOL was added to enhance the cross bonding between polymer chains. This work will accelerate the research and application development of intrinsically self-healing conducting polymers for commercial capacitors, antistatic coatings, implantable, printable electronics, and so on.